|
|
 |
|
|
 |
|
|
| Date | Title | Description | Link |
| June, 2009 |
|
|
This Colorado based job shop needed machines that would allow them to quickly move from aluminum on one job to roughing a titanium piece with a 2-inch cutter on the next - and they needed to do it without sacrificing accuracy.
|
|
|
| June, 2009 |
|
|
What's a reasonable economic order quantity? With this Southern California job shop's Kitamura Supercell-400 5-Axis Machining Center...It's one.
|
|
|
| March, 2009 |
|
|
Designing and Manufacturing Special Fixturing on Kitamura's Mycenter-HX400iF Horizontal Machining Center Enables End Users to Machine New Parts More Efficiently with Less or no Labor
|
|
|
| March, 2009 |
|
|
When it comes to Molds, This Successful Entrepreneur Says Bigger is Better
|
|
|
| December, 2008 |
|
|
Precision is a word that's thrown around a lot in manufacturing. Nowhere are the requirements and challenges for precision higher than in aerospace machining.
|
|
|
| December, 2008 |
|
|
Problem: Large parts required time-consuming, labor intensive machining process Solution: Kitamura HX1000i heavy duty machining center results in fourfold increase in productivity
|
|
|
| November, 2008 |
|
|
Five-axis machining technology has been completely viable for more than a decade now. Code writing problems are history, prices are reasonable, and quality is better than ever
|
|
|
| October, 2008 |
|
|
Jumping Into This Competitive Strategy Without a Plan Could be Disastrous. But by Following the Due Diligence being Discussed Here, Your Business Could not Only Grow, it Could Thrive
|
|
|
| October, 2007 |
|
|
How a Job Shop Learned to Swim Against the Offshore Flow Using Kitamura High Speed Vertical Machining Centers.
|
|
|
| August, 2007 |
|
|
Making components for industries such as oil and gas, aerospace and defense demands a broad range of machining capabilities
|
|
|
| August, 2007 |
|
|
A family owned business founded in 1967 has built their operations on full-service, customer-focused manufacturing by increasing productivity and replacing obsolete technology.
|
|
|
| June, 2007 |
|
|
The owner of this shop saw his sister stand and walk again. Now the shop makes the oral devices that he hopes will change other lives just as profoundly
|
|
|
| January, 2007 |
|
|
While Productivity is up in today's brave new world of manufacturing, cost is the driving force. Flexibility is key in two areas: The machining cell, and those providing the equipment. A story of shared vision that binds two companies in a spirit of partnership.
|
|
|
| January, 2007 |
|
|
Cutting Tool Engineering Magazine - Staying Sharp
|
|
|
| November, 2006 |
|
|
A Silicon Valley Job Shop Succeeds in Hard Times by Specializing in Ultra-Precision Machining
|
|
|
| March, 2005 |
|
|
A Highly Successful Job Shop Beats the Odds with Lean and Flexible Manufacturing Using Kitamura's HX400iF Horizontal with 21 Station APC
|
|
|
| October, 2004 |
|
|
Quick Turnaround on Repeat Jobs is a Competitive Advantage for this Shop
|
|
|
|
|
|
|
| Date | Title | Description | Link |
| July, 2010 |
|
|
Kitamura Machinery, the premier manufacturer of precision horizontal, vertical and 5-axis machining centers, announced that the company will feature its new compact horizontal machining center, the Mycenter-HX400iSII, at IMTS 2010 in Chicago, September 13th ~ 18th
|
|
|
| August, 2009 |
|
|
Kitamura Machinery, a manufacturer of horizontal, vertical and 5-axis machining centers, has completed construction on its headquarter expansion in Takaoka-City, Japan.
|
|
|
| July, 2009 |
|
|
Kitamura Machinery, a manufacturer of horizontal, vertical and 5-axis machining centers, announced that VMC Technologies, Inc. is now the dealer of record for the state of Michigan.
|
|
|
| April, 2009 |
|
|
As Seen in Tooling and Production Magazine - Monozukuri is the ability to fuse science and technology with human skills, passions, and teamwork in designing and planning high quality products.
|
|
|
| October, 2008 |
|
|
Kitamura's Mycenter-HX800i Horizontal Machining Center delivers the precision, accuracy and repeatability required to produce close tolerance parts from the toughest materials
|
|
|
| October, 2008 |
|
|
Customer demands for more intricate machining capabilities drives decision to add Kitamura horizontal and 5-axis units to floor
|
|
|
| July, 2008 |
|
|
Precision Machining Center Manufacturer Honored with 20th Japan Industrial Machining Union Chairman Award
|
|
|
| July, 2008 |
|
|
Precision and Rigidity of Mycneter-HX400iF Horizontal and Mytrunnion-1 5-axis Machines Allow Manufacturers to Automate Production with Confidence
|
|
|
| June, 2008 |
|
|
Mycenter-HX1000i Provides Faster, More Reliable Large Part Manufacturing For a Variety of Industries.
|
|
|
| June, 2008 |
|
|
Highly experienced, Full Service Dealer Will Now Represent Kitamura Products in Pennsylvania, Maryland, Delaware and northern tip of Virginia
|
|
|
| June, 2008 |
|
|
Cites Critical Need for Space to Produce Larger Size, High Performance Machining Centers
|
|
|
| May, 2008 |
|
|
Multi-Use Mycenter-HX400iF Horizontal Machining Center and Mytrunnion-5 5-Axis Vertical Machining Center on Display at SME Show
|
|
|
| March, 2008 |
|
|
Technology PR Agency selected for its track record for business-to-business results
|
|
|
| March, 2008 |
|
|
Westec 2008 - Mytrunnion-1 5-Axis Machining Center Machines, Grinds and Turns with Ultra Precision and High Speed
|
|
|
| January, 2008 |
|
|
Kitamura announces its partnership with Meredith Machinery as the new exclusive dealer for the sales and service of Kitamura products in Kentucky and Indiana
|
|
|
| December, 2007 |
|
|
Kitamura Machinery of USA, Inc. has announced the appointment of Knox Machinery, Inc., Franklin, OH, as dealer for Southern Ohio.
|
|
|
| July, 2007 |
|
|
Heavy Duty Horizontal Machining for Aerospace, Oil Field, Heavy Construction, Automotive and Power Generation Industries Where Large Part Machining Requires a More Expansive Work Envelope.
|
|
|
| May, 2007 |
|
|
180 Degree Rotating 2-station Automatic Pallet Changer for Flexibility in High-Volume Production Work with Small to Medium Sized Parts
|
|
|
| May, 2007 |
|
|
Kitamura's HX250iF Horizontal Machining Center offers a Unique Design within a Compact Footprint
|
|
|
| January, 2007 |
|
|
A Compact Horizontal Machining Center that is Truly a 400mm Size Machine Within a 300mm Machine Footprint
|
|
|
| January, 2007 |
|
|
Kitamura Machinery of USA, Inc. is pleased to announce that is has hired on Fuchs Machinery
|
|
|
| December, 2006 |
|
|
Combining High Precision and High Speed with Heavy Duty Cutting Power
|
|
|
| December, 2006 |
|
|
Offering Built-In Precision with Rigid Meehanite Cast Iron Construction for a Variety of Cutting Capabilities
|
|
|
| December, 2006 |
|
|
2-Step Gear Driven Spindle with Box Way Rigidity for Extreme Tough Cutting Power
|
|
|
| September, 2006 |
|
|
5-Axis Vertical Machining Center Now Available with Pallet Changing Capabilities
|
|
|
| August, 2006 |
|
|
Compact 5-Axis Machining for the Medical Device Market
|
|
|
| August, 2006 |
|
|
The Design Strength and Rigidity Necessary to Produce Close Tolerance Parts from the Most Difficult to Machine Materials
|
|
|
| July, 2006 |
|
|
Kitamura's Mycenter-3XiF Vertical Machining Center is Versatile in Size and Function - The Perfect "Job Ready" VMC
|
|
|
| June, 2006 |
|
|
Allowing for Deep Cuts on Tough Materials with up to 199Ft-Lbs of Torque and High-Speed for Exceptional Fine Finish Capabilities
|
|
|
| January, 2005 |
|
|
Mike Umeno, Kitamura Vice President announced the appointment of Flint Machine Tools, Inc. as exclusive distributor for...
|
|
|
|
|
|
|
|
|
 |
|