Our Machinery Products

HORIZONTAL
HXiG-Series
Mycenter-HX250iG
Kitamura Mycenter-HX250iG
Table Size: 10” x 10” (254 x 254mm)
Travel (X, Y, Z): 12” x 12” x 13”
(305 x 305 x 330mm)
Spindle Taper: NST No. 30
Spindle Speed: 150~15,000rpm **30,000 Option 
Tool Storage Capacity: 40 Pcs.- Expandable in the Field to 102 Tools!
Tool Change Time
(T-T/C-C):
1.2 Sec. /2.8 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
108,000deg./min. (300rpm)
Power Requirement: 30KVA
Mycenter-HX300iG/400
Kitamura Mycenter-HX300iG - HORIZONTAL Machining Centers
Table Size: 12” x 12” (305 x 305mm)
Travel (X, Y, Z): 18.1” x 20.1” x 22.0”
(460 x 510 x 560mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm **20,000, 30,000 Option 
Tool Storage Capacity: 50 Pcs.- Field Expandable Option to 100/150/200 Tools
Tool Change Time
(T-T/C-C):
1.3 Sec. /2.5 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
54,000deg./min. (150rpm)
Power Requirement: 45KVA
Mycenter-HX400iG/500
Kitamura Mycenter-HX400iG - HORIZONTAL Machining Centers
Table Size: 15.75” x 15.75” (400 x 400mm)
Travel (X, Y, Z): 24” x 24” x 24”
(610 x 610 x 610mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm (20,000rpm Opt.)
Tool Storage Capacity: 50 Pcs. (100,150,200,300 Opt.)
Tool Change Time
(T-T/C-C):
1.3 sec. /2.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
45,000deg./min. (125rpm)
Power Requirement: 50KVA
Mycenter-HX500iG/630 #40
Kitamura Mycenter-HX500iG/630
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 31.5” x 36.6”
(870 x 800 x 930mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
1.3 sec. /3.8 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
43,200deg./min. (120rpm)
Power Requirement: 55KVA
Mycenter-HX500iG/630 #50
Kitamura Mycenter-HX500iG/630
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 31.5” x 36.6”
(870 x 800 x 930mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122,162,212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /4.8 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
43,200deg./min. (120rpm)
Power Requirement: 75KVA
Mycenter-HX630G/800
Kitamura Mycenter-HX630G - HORIZONTAL Machining Centers
Table Size: 24.8” x 24.8” (630 x 630mm)
Travel (X, Y, Z): 43.3” x 36.2” x 41.3”
(1,100 x 920 x 1,050mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122, 162, 212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.2 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
12,000deg./min. (33.3rpm)
Power Requirement: 65KVA
Mycenter-HX800G/1000
Kitamura Mycenter-HX800G - HORIZONTAL Machining Centers
Table Size: 31.5” x 31.5” (800 x 800mm)
Travel (X, Y, Z): 61.0” x 51.2” x 55.1”
(1,550 x 1,300 x 1,400mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122, 162,212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.9 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
9,000deg./min. (25rpm)
Power Requirement: 70KVA
Mycenter-HX1000G/HX1250G
Kitamura
Table Size: 39.37” x 39.37” (1,000 x 1,000mm)
49.2" x 49.2" (1,250 x 1,250mm) *HX1250G
Travel (X, Y, Z): 80.31” x 51.97” x 53.94”
(2,040 x 1,320 x 1,370mm)
Spindle Taper: NST No. 50
Spindle Speed: 20~8,000rpm (35~12,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 150 Pcs. (200 Opt.)
Tool Change Time
(T-T/C-C):
3.0 sec. /7.0 sec.
Rapid Feed (X,Y,Z) 1417ipm (36m/min)
Power Requirement: 85KVA
HX-Series
Mycenter-HX400iFTGA
Kitamura Mycenter-HX400iFTGA - HORIZONTAL Machining Centers
Table Size: 15.7” x 15.7” (400 x 400mm)
Travel (X, Y, Z): 28.9” x 24” x 24”
(735 x 610 x 610mm)
Spindle Taper: NST No. 40
Spindle Speed: 35~13,000rpm (20,000rm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
1.0 Sec. /3.2 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1,969ipm (50m/min)
15,000deg./min.
Power Requirement: 50KVA
Mycenter-HX500iTGA
Kitamura Mycenter-HX500iTGA - HORIZONTAL Machining Centers
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 28” x 26”
(870 x 710 x 660mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
2.5 sec. /5.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1,969ipm (50m/min)
12,000deg./min.
Power Requirement: 55KVA
Mycenter-HX630iTGA
Kitamura Mycenter-HX630iTGA - HORIZONTAL Machining Centers
Table Size: 24.8” x 24.8” (630 x 630mm)
Travel (X, Y, Z): 41.34” x 33.46” x 35.43”
(1,000 x 800 x 820mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (20~8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
2.5 sec. /5.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1969ipm (50m/min)
12,000deg/min
Power Requirement: 55KVA
Mycenter-HX800iLTGA
Kitamura Mycenter-HX800iLTGA - HORIZONTAL Machining Centers
Table Size: 31.5” x 31.5” (800 x 800mm)
Travel (X, Y, Z): 55.11” x 49.21” x 52.16”
(1,400 x 1,250 x 1,325mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (20~8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
3.0 sec. /7.0 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B):
1969ipm (50m/min)
8,000deg/min
Power Requirement: 55KVA
5-AXIS
MedCenter5AX
MedCenter5AX
Kitamura
Table Size: 6.7” (170mm) round dia.
Travel (X, Y, Z): 10” x 13” x 13”
(254 x 330 x 330mm)
Travel (A, C): -120~+120 Degrees/0 ~ 360 Degrees
Spindle Taper: HSK- E40
Spindle Speed: 300~30,000rpm
Tool Storage Capacity: 40 Pcs.(120 Optional)
Tool Change Time (T-T): 1.5 Sec.
Rapid Feed (X, Y, Z): 2362ipm (60m/min) X & Y, 1969ipm (50m/min) Z
Rapid Feed (A, C): 36,000 deg. /min (100rpm), 72,000 deg./min (200rpm)
Power Requirement: 35KVA
Mytrunnion-Series
Mytrunnion-1
Kitamura Mytrunnion-1 - 5-Axis Machining Centers
Table Size: 4.72” round (120mm dia.)
Travel (X, Y, Z): 12.8” x 20.1” x 18.1”
(325 x 510 x 460mm)
Travel (A, C): -110~+30 deg. /0~360 deg.
Spindle Taper: NST No. 30
Spindle Speed: 50~15,000rpm (300~30,000rpm Opt.)
Tool Storage Capacity: 60 Pcs.
Tool Change Time
(T-T/C-C):
1.1 Sec. /2.8 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 1,417ipm (36m/min) Z
Rapid Feed (A, C): 7,992 deg. /min, 360,000 deg. /min
Power Requirement: 35KVA
Mytrunnion-4G
Kitamura Mytrunnion-4g - 5-Axis Machining Centers
Table Size: 15.7” (400mm) round dia.
Travel (X, Y, Z): 24” x 24” x 19.7”
(610 x 610 x 500mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 60 Pcs. (Opt. 100T)
Tool Change Time (T-T/C-C): 2.2 Sec. /5.8 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 985ipm (25m/min) Z
Rapid Feed (A, C): 18,000 deg. /min (50rpm)
Power Requirement: 45KVA
Mytrunnion-5G
5-Axis Vertical Machining Center
Table Size: 24.8” round (630mm dia.)
Travel (X, Y, Z): 32” x 29.3” x 19.7”
(815 x 745 x 500mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm
Tool Storage Capacity: 50 Pcs. (100 Opt.)
Tool Change Time (T-T/C-C): 2.5 Sec. /5.0 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 984ipm (25m/min) Z
Rapid Feed (A, C): 2,000 deg. /min, 6,000 deg. /min
Power Requirement: 50KVA
Mytrunnion-7G
Kitamura Mytrunnion-7G
Table Size: 39.7” (1,000mm) round dia.
Travel (X, Y, Z): 46.9” x 54.3” x 30.1” (1,190 x 1,380 x 765mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 100 Pcs.
Tool Change Time (T-T/C-C): 3.3 Sec. /9.7 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,181ipm (30m/min) Z
Power Requirement: 65KVA
Supercell-Series
Supercell-300G
Kitamura Supercell-300G - 5-Axis Machining Centers
Table Size: 7.9” (200mm) Round
Travel (X, Y, Z): 18.1” x 20.1” x 18.1”
(460 x 510 x 460mm)
Travel (A, B): -120 to +30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 200~20,000rpm
Tool Storage Capacity: 174 Pcs. (230,258,314 Opt.) Matrix Style
Tool Change Time
(T-T/C-C):
1.3 sec. /2.5 sec.
Rapid Feed
 (X, Y, and Z):
2,362ipm (60m/min)
Rapid Feed (A, B): 18,000 deg./min (50rpm)
Power Requirement: 55KVA
Supercell-400G
Kitamura Supercell-400 - 5-Axis Machining Centers
Table Size: 13.8” (350mm) Round
Travel (X, Y, Z): 20.1” x 20.1” x 20.1”
(510 x 510 x 510mm)
Travel (A, B): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm
Tool Storage Capacity: 140 Pcs. (190, 290 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.0 sec.
Rapid Feed
 (X, Y, and Z):
1969ipm (50m/min)
Rapid Feed (A, B): 2,400deg./min (6.7rpm)/12,000deg./min (33.3rpm)
Power Requirement: 45KVA
XVT-Series
Mycenter-3XVT
Kitamura
Rotary Table Size: 8.7" Diameter (220mm)
w/Full Table Length: 11.8" x 19.7" (300 x 500mm)
Travel (X, Y, Z): 30.7” x 20.1” x 17.3”
(780 x 510 x 439mm)
Spindle Taper: NST No. 40
Spindle Speed: 15,000rpm, Built-In, Dual Contact
Tool Storage Capacity: 40 Pcs.
Tool Change Time
(T-T/C-C):
2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y, Z): 1,890ipm (48m/min)
Power Requirement: 30KVA
Mycenter-4XT
Kitamura Mycenter-4XT - 5-Axis Machining Centers
Rotary Table Size: 15.75" Diameter (400mm)
w/Full Table Length: 14.37" x 23.62" (365 x 600mm)
Travel (X, Y, Z): 31.50” x 24.02” x 20.08”
(800 x 610 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 15,000rpm
Tool Storage Capacity: 30 Pcs.
Tool Change Time
(T-T/C-C):
2.5 Sec. /7.0 Sec.
Rapid Feed (X, Y, Z): 1,417ipm (36m/min) X/Y/Z
Power Requirement: 35KVA
DOUBLE COLUMN
G-series
Bridgecenter-6G#40
Kitamura Bridgecenter-6G#40 - Double Column Machining Centers
Table Size: 35.4” x 70.9” (900 x 1,800mm)
Travel (X, Y, Z): 60.2” x 43.1” x 28.0”
(1,530 x 1,095 x 710mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 35KVA
Bridgecenter-6G#50
Kitamura Bridgecenter-6G
Table Size: 35.4” x 70.9” (900 x 1,800mm)
Travel (X, Y, Z): 60.2” x 43.1” x 28.0”
(1,530 x 1,095 x 710mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 45KVA
Bridgecenter-8G#50
Kitamura Bridgecenter-8G#50 - Double Column Machining Centers
Table Size: 35.4” x 98.4” (900 x 2,500mm)
Travel (X, Y, Z): 80.0” x 43.1” x 28.0”
(2,032 x 1,095 x 710mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 45KVA
Bridgecenter-10G
Kitamura
Table Size: 53.9” x 118.1” (1,370 x 3,000mm)
Travel (X, Y, Z): 100.0” x 63.6” x 31.5”
(2,540 x 1,615 x 800mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /14 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 50KVA
Bridgecenter-12G
Kitamura Bridgecenter-12G - Double Column Machining Centers
Table Size: 53.9” x 137.8” (1,370 x 3,500mm)
Travel (X, Y, Z): 120.0” x 63.6” x 31.5”
(3,050 x 1,615 x 800mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /15 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 50KVA
J-Series
Jigcenter-5G Vertical Jig Boring Machine
Kitamura Jigcenter-5
Table Size: 30.7” x 47.2” (780 x 1,200mm)
Travel (X, Y, Z): 32” x 29.3” x 19.7”
(815 x 745 x 500mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm – Geared Spindle
Tool Storage Capacity: 50 Pcs. (100 Opt.)
Tool Change Time
(T-T/C-C):
2.5 Sec. /5.0 Sec.
Rapid Feed (X, Y, Z): 984pm (25m/min)
Power Requirement: 35KVA
VERTICAL
Mycenter-Super Micron
Mycenter-Super Micron
Kitamura
Table Size: 15.7” x 19.7” (400 x 500mm)
Travel (X, Y, Z): 17.7” x 13.8” x 11.8”
(450 x 350 x 300mm)
Spindle Taper: HSK-E32
Spindle Speed: 400~40,000rpm
Tool Storage Capacity: 18Pcs. (40 Optional) 
Rapid Feed (X, Y, Z): 591ipm (15m/min) X, Y, Z
Power Requirement: 30KVA
G-Series
Mycenter-3020G, 15k "Sparkchanger"
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 15k
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 20k “Sparkchanger”
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1” (762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm 4-Step, Gear Driven
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 20k
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm, 4-Step, Gear Driven
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-4XG#40
Kitamura
Table Size: 20.6” x 43.3” (522 x 1,100mm)
Travel (X, Y, Z): 41.0” x 20.1” x 20.1”
(1,042 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm 4-Step, Gear Driven
Tool Storage Capacity: 40 Pcs. (60 Opt.)
Tool Change Time (T-T/C-C): 1.2 Sec. /4.7 Sec.
Rapid Feed (X, Y x  Z): 1,969ipm (50m/min)  x 1,417ipm (36m/min)
Power Requirement: 35KVA
Mycenter-4XG#50
Kitamura
Table Size: 20.6” x 43.3” (522 x 1,100mm)
Travel (X, Y, Z): 41.0” x 20” x 20”
(1,042 x 510 x 510mm)
Spindle Taper: NST No. 50
Spindle Speed: 20~10,000rpm – Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60 Opt.)
Tool Change Time (T-T/C-C): 2.5 Sec. /8.0 Sec.
Rapid Feed (X, Y x  Z): 1,969ipm (50m/min)  x 1,417ipm (36m/min)
Power Requirement: 35KVA
XV-Series
Mycenter-2XV "Sparkchanger"
Kitamura
Table Size: 15.7” x 22.0” (400 x 560mm)
Travel (X, Y, Z): 23.6” x 20.1” x 20.1”
(600 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-3XV
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 29.9” x 20.1” x 20.1”
(760 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 30 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-4XV
Kitamura
Table Size: 19.7” x 44.1” (500 x 1,120mm)
Travel (X, Y, Z): 40.2” x 20.1” x 20.1”
(1,020 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-5XV
Kitamura
Table Size: 27.6” x 55.9” (700 x 1,420mm)
Travel (X, Y, Z): 50.0” x 28.0” x 25.0”
(1,270 x 710 x 635mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 40KVA
X-Series
Mycenter-7X#40
Kitamura Mycenter-7X#40 - Vertical Machining Centers
Table Size: 25.6” x 66.9” (650 x 1,700mm)
Travel (X, Y, Z): 60.2” x 25.6” x 27.0”
(1,530 x 650 x 686mm)
Spindle Taper: NST No. 40, NST No. 50
Spindle Speed: 20~10,000rpm (40~15,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 30 Pcs. (40, 60 Opt.)
Tool Change Time (T-T/C-C): 2.0 Sec. /6.5 Sec.
Rapid Feed (X, Y x Z): 945ipm (24m/min) x 787.4ipm (20m/min) 
Power Requirement: 40KVA
Mycenter-7X#50
Kitamura Mycenter-7X#50 - Vertical Machining Centers
Table Size: 25,6” x 66,9” (650 x 1,700mm)
Travel (X,Y,Z): 60,2” x 25,6” x 27,0”
(1,530 x 650 x 686mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~5,000rpm (20-10,000rpm als Option), 4-Step Gear Driven
Tool Storage Capacity: 30 Stk. (40, 60 als Option)
Tool Change Time (T-T/C-C): 2.5 Sec./8.5 Sec.
Rapid Feed (X, Y x  Z): 945ipm (24m/min)  x 787ipm (20m/min)
Power Requirement: 40KVA
REVERSE PRINT
Reverse Print Machining Center
XrossCut
Kitamura
Table Size: 20” x 24” (510 x 610mm)
Travel (X, Y, Z): 12” x 22” x 14”
(310 x 560 x 350mm)
Spindle Taper: HSK-E25
Spindle Speed: 70,000rpm
Tool Storage Capacity: 5Pcs. 
Rapid Feed (X, Y, Z): 4,724 Zoll/min (120m/min) X x 2,362 Zoll/min (60m/min) Y x 1,417 Zoll/min (36m/min) Z
Power Requirement: 20KVA
HORIZONTAL
HXiG-Series
Mycenter-HX250iG
Kitamura Mycenter-HX250iG
Table Size: 10” x 10” (254 x 254mm)
Travel (X, Y, Z): 12” x 12” x 13”
(305 x 305 x 330mm)
Spindle Taper: NST No. 30
Spindle Speed: 150~15,000rpm **30,000 Option 
Tool Storage Capacity: 40 Pcs.- Expandable in the Field to 102 Tools!
Tool Change Time
(T-T/C-C):
1.2 Sec. /2.8 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
108,000deg./min. (300rpm)
Power Requirement: 30KVA
Mycenter-HX300iG/400
Kitamura Mycenter-HX300iG - HORIZONTAL Machining Centers
Table Size: 12” x 12” (305 x 305mm)
Travel (X, Y, Z): 18.1” x 20.1” x 22.0”
(460 x 510 x 560mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm **20,000, 30,000 Option 
Tool Storage Capacity: 50 Pcs.- Field Expandable Option to 100/150/200 Tools
Tool Change Time
(T-T/C-C):
1.3 Sec. /2.5 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
54,000deg./min. (150rpm)
Power Requirement: 45KVA
Mycenter-HX400iG/500
Kitamura Mycenter-HX400iG - HORIZONTAL Machining Centers
Table Size: 15.75” x 15.75” (400 x 400mm)
Travel (X, Y, Z): 24” x 24” x 24”
(610 x 610 x 610mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm (20,000rpm Opt.)
Tool Storage Capacity: 50 Pcs. (100,150,200,300 Opt.)
Tool Change Time
(T-T/C-C):
1.3 sec. /2.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
45,000deg./min. (125rpm)
Power Requirement: 50KVA
Mycenter-HX500iG/630 #40
Kitamura Mycenter-HX500iG/630
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 31.5” x 36.6”
(870 x 800 x 930mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
1.3 sec. /3.8 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
43,200deg./min. (120rpm)
Power Requirement: 55KVA
Mycenter-HX500iG/630 #50
Kitamura Mycenter-HX500iG/630
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 31.5” x 36.6”
(870 x 800 x 930mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122,162,212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /4.8 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
43,200deg./min. (120rpm)
Power Requirement: 75KVA
Mycenter-HX630G/800
Kitamura Mycenter-HX630G - HORIZONTAL Machining Centers
Table Size: 24.8” x 24.8” (630 x 630mm)
Travel (X, Y, Z): 43.3” x 36.2” x 41.3”
(1,100 x 920 x 1,050mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122, 162, 212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.2 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
12,000deg./min. (33.3rpm)
Power Requirement: 65KVA
Mycenter-HX800G/1000
Kitamura Mycenter-HX800G - HORIZONTAL Machining Centers
Table Size: 31.5” x 31.5” (800 x 800mm)
Travel (X, Y, Z): 61.0” x 51.2” x 55.1”
(1,550 x 1,300 x 1,400mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122, 162,212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.9 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
9,000deg./min. (25rpm)
Power Requirement: 70KVA
Mycenter-HX1000G/HX1250G
Kitamura
Table Size: 39.37” x 39.37” (1,000 x 1,000mm)
49.2" x 49.2" (1,250 x 1,250mm) *HX1250G
Travel (X, Y, Z): 80.31” x 51.97” x 53.94”
(2,040 x 1,320 x 1,370mm)
Spindle Taper: NST No. 50
Spindle Speed: 20~8,000rpm (35~12,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 150 Pcs. (200 Opt.)
Tool Change Time
(T-T/C-C):
3.0 sec. /7.0 sec.
Rapid Feed (X,Y,Z) 1417ipm (36m/min)
Power Requirement: 85KVA
HX-Series
Mycenter-HX400iFTGA
Kitamura Mycenter-HX400iFTGA - HORIZONTAL Machining Centers
Table Size: 15.7” x 15.7” (400 x 400mm)
Travel (X, Y, Z): 28.9” x 24” x 24”
(735 x 610 x 610mm)
Spindle Taper: NST No. 40
Spindle Speed: 35~13,000rpm (20,000rm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
1.0 Sec. /3.2 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1,969ipm (50m/min)
15,000deg./min.
Power Requirement: 50KVA
Mycenter-HX500iTGA
Kitamura Mycenter-HX500iTGA - HORIZONTAL Machining Centers
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 28” x 26”
(870 x 710 x 660mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
2.5 sec. /5.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1,969ipm (50m/min)
12,000deg./min.
Power Requirement: 55KVA
Mycenter-HX630iTGA
Kitamura Mycenter-HX630iTGA - HORIZONTAL Machining Centers
Table Size: 24.8” x 24.8” (630 x 630mm)
Travel (X, Y, Z): 41.34” x 33.46” x 35.43”
(1,000 x 800 x 820mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (20~8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
2.5 sec. /5.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1969ipm (50m/min)
12,000deg/min
Power Requirement: 55KVA
Mycenter-HX800iLTGA
Kitamura Mycenter-HX800iLTGA - HORIZONTAL Machining Centers
Table Size: 31.5” x 31.5” (800 x 800mm)
Travel (X, Y, Z): 55.11” x 49.21” x 52.16”
(1,400 x 1,250 x 1,325mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (20~8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
3.0 sec. /7.0 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B):
1969ipm (50m/min)
8,000deg/min
Power Requirement: 55KVA
5-AXIS
MedCenter5AX
MedCenter5AX
Kitamura
Table Size: 6.7” (170mm) round dia.
Travel (X, Y, Z): 10” x 13” x 13”
(254 x 330 x 330mm)
Travel (A, C): -120~+120 Degrees/0 ~ 360 Degrees
Spindle Taper: HSK- E40
Spindle Speed: 300~30,000rpm
Tool Storage Capacity: 40 Pcs.(120 Optional)
Tool Change Time (T-T): 1.5 Sec.
Rapid Feed (X, Y, Z): 2362ipm (60m/min) X & Y, 1969ipm (50m/min) Z
Rapid Feed (A, C): 36,000 deg. /min (100rpm), 72,000 deg./min (200rpm)
Power Requirement: 35KVA
Mytrunnion-Series
Mytrunnion-1
Kitamura Mytrunnion-1 - 5-Axis Machining Centers
Table Size: 4.72” round (120mm dia.)
Travel (X, Y, Z): 12.8” x 20.1” x 18.1”
(325 x 510 x 460mm)
Travel (A, C): -110~+30 deg. /0~360 deg.
Spindle Taper: NST No. 30
Spindle Speed: 50~15,000rpm (300~30,000rpm Opt.)
Tool Storage Capacity: 60 Pcs.
Tool Change Time
(T-T/C-C):
1.1 Sec. /2.8 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 1,417ipm (36m/min) Z
Rapid Feed (A, C): 7,992 deg. /min, 360,000 deg. /min
Power Requirement: 35KVA
Mytrunnion-4G
Kitamura Mytrunnion-4g - 5-Axis Machining Centers
Table Size: 15.7” (400mm) round dia.
Travel (X, Y, Z): 24” x 24” x 19.7”
(610 x 610 x 500mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 60 Pcs. (Opt. 100T)
Tool Change Time (T-T/C-C): 2.2 Sec. /5.8 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 985ipm (25m/min) Z
Rapid Feed (A, C): 18,000 deg. /min (50rpm)
Power Requirement: 45KVA
Mytrunnion-5G
5-Axis Vertical Machining Center
Table Size: 24.8” round (630mm dia.)
Travel (X, Y, Z): 32” x 29.3” x 19.7”
(815 x 745 x 500mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm
Tool Storage Capacity: 50 Pcs. (100 Opt.)
Tool Change Time (T-T/C-C): 2.5 Sec. /5.0 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 984ipm (25m/min) Z
Rapid Feed (A, C): 2,000 deg. /min, 6,000 deg. /min
Power Requirement: 50KVA
Mytrunnion-7G
Kitamura Mytrunnion-7G
Table Size: 39.7” (1,000mm) round dia.
Travel (X, Y, Z): 46.9” x 54.3” x 30.1” (1,190 x 1,380 x 765mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 100 Pcs.
Tool Change Time (T-T/C-C): 3.3 Sec. /9.7 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,181ipm (30m/min) Z
Power Requirement: 65KVA
Supercell-Series
Supercell-300G
Kitamura Supercell-300G - 5-Axis Machining Centers
Table Size: 7.9” (200mm) Round
Travel (X, Y, Z): 18.1” x 20.1” x 18.1”
(460 x 510 x 460mm)
Travel (A, B): -120 to +30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 200~20,000rpm
Tool Storage Capacity: 174 Pcs. (230,258,314 Opt.) Matrix Style
Tool Change Time
(T-T/C-C):
1.3 sec. /2.5 sec.
Rapid Feed
 (X, Y, and Z):
2,362ipm (60m/min)
Rapid Feed (A, B): 18,000 deg./min (50rpm)
Power Requirement: 55KVA
Supercell-400G
Kitamura Supercell-400 - 5-Axis Machining Centers
Table Size: 13.8” (350mm) Round
Travel (X, Y, Z): 20.1” x 20.1” x 20.1”
(510 x 510 x 510mm)
Travel (A, B): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm
Tool Storage Capacity: 140 Pcs. (190, 290 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.0 sec.
Rapid Feed
 (X, Y, and Z):
1969ipm (50m/min)
Rapid Feed (A, B): 2,400deg./min (6.7rpm)/12,000deg./min (33.3rpm)
Power Requirement: 45KVA
XVT-Series
Mycenter-3XVT
Kitamura
Rotary Table Size: 8.7" Diameter (220mm)
w/Full Table Length: 11.8" x 19.7" (300 x 500mm)
Travel (X, Y, Z): 30.7” x 20.1” x 17.3”
(780 x 510 x 439mm)
Spindle Taper: NST No. 40
Spindle Speed: 15,000rpm, Built-In, Dual Contact
Tool Storage Capacity: 40 Pcs.
Tool Change Time
(T-T/C-C):
2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y, Z): 1,890ipm (48m/min)
Power Requirement: 30KVA
Mycenter-4XT
Kitamura Mycenter-4XT - 5-Axis Machining Centers
Rotary Table Size: 15.75" Diameter (400mm)
w/Full Table Length: 14.37" x 23.62" (365 x 600mm)
Travel (X, Y, Z): 31.50” x 24.02” x 20.08”
(800 x 610 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 15,000rpm
Tool Storage Capacity: 30 Pcs.
Tool Change Time
(T-T/C-C):
2.5 Sec. /7.0 Sec.
Rapid Feed (X, Y, Z): 1,417ipm (36m/min) X/Y/Z
Power Requirement: 35KVA
DOUBLE COLUMN
G-series
Bridgecenter-6G#40
Kitamura Bridgecenter-6G#40 - Double Column Machining Centers
Table Size: 35.4” x 70.9” (900 x 1,800mm)
Travel (X, Y, Z): 60.2” x 43.1” x 28.0”
(1,530 x 1,095 x 710mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 35KVA
Bridgecenter-6G#50
Kitamura Bridgecenter-6G
Table Size: 35.4” x 70.9” (900 x 1,800mm)
Travel (X, Y, Z): 60.2” x 43.1” x 28.0”
(1,530 x 1,095 x 710mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 45KVA
Bridgecenter-8G#50
Kitamura Bridgecenter-8G#50 - Double Column Machining Centers
Table Size: 35.4” x 98.4” (900 x 2,500mm)
Travel (X, Y, Z): 80.0” x 43.1” x 28.0”
(2,032 x 1,095 x 710mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 45KVA
Bridgecenter-10G
Kitamura
Table Size: 53.9” x 118.1” (1,370 x 3,000mm)
Travel (X, Y, Z): 100.0” x 63.6” x 31.5”
(2,540 x 1,615 x 800mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /14 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 50KVA
Bridgecenter-12G
Kitamura Bridgecenter-12G - Double Column Machining Centers
Table Size: 53.9” x 137.8” (1,370 x 3,500mm)
Travel (X, Y, Z): 120.0” x 63.6” x 31.5”
(3,050 x 1,615 x 800mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /15 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 50KVA
J-Series
Jigcenter-5G Vertical Jig Boring Machine
Kitamura Jigcenter-5
Table Size: 30.7” x 47.2” (780 x 1,200mm)
Travel (X, Y, Z): 32” x 29.3” x 19.7”
(815 x 745 x 500mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm – Geared Spindle
Tool Storage Capacity: 50 Pcs. (100 Opt.)
Tool Change Time
(T-T/C-C):
2.5 Sec. /5.0 Sec.
Rapid Feed (X, Y, Z): 984pm (25m/min)
Power Requirement: 35KVA
VERTICAL
Mycenter-Super Micron
Mycenter-Super Micron
Kitamura
Table Size: 15.7” x 19.7” (400 x 500mm)
Travel (X, Y, Z): 17.7” x 13.8” x 11.8”
(450 x 350 x 300mm)
Spindle Taper: HSK-E32
Spindle Speed: 400~40,000rpm
Tool Storage Capacity: 18Pcs. (40 Optional) 
Rapid Feed (X, Y, Z): 591ipm (15m/min) X, Y, Z
Power Requirement: 30KVA
G-Series
Mycenter-3020G, 15k "Sparkchanger"
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 15k
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 20k “Sparkchanger”
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1” (762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm 4-Step, Gear Driven
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 20k
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm, 4-Step, Gear Driven
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-4XG#40
Kitamura
Table Size: 20.6” x 43.3” (522 x 1,100mm)
Travel (X, Y, Z): 41.0” x 20.1” x 20.1”
(1,042 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm 4-Step, Gear Driven
Tool Storage Capacity: 40 Pcs. (60 Opt.)
Tool Change Time (T-T/C-C): 1.2 Sec. /4.7 Sec.
Rapid Feed (X, Y x  Z): 1,969ipm (50m/min)  x 1,417ipm (36m/min)
Power Requirement: 35KVA
Mycenter-4XG#50
Kitamura
Table Size: 20.6” x 43.3” (522 x 1,100mm)
Travel (X, Y, Z): 41.0” x 20” x 20”
(1,042 x 510 x 510mm)
Spindle Taper: NST No. 50
Spindle Speed: 20~10,000rpm – Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60 Opt.)
Tool Change Time (T-T/C-C): 2.5 Sec. /8.0 Sec.
Rapid Feed (X, Y x  Z): 1,969ipm (50m/min)  x 1,417ipm (36m/min)
Power Requirement: 35KVA
XV-Series
Mycenter-2XV "Sparkchanger"
Kitamura
Table Size: 15.7” x 22.0” (400 x 560mm)
Travel (X, Y, Z): 23.6” x 20.1” x 20.1”
(600 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-3XV
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 29.9” x 20.1” x 20.1”
(760 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 30 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-4XV
Kitamura
Table Size: 19.7” x 44.1” (500 x 1,120mm)
Travel (X, Y, Z): 40.2” x 20.1” x 20.1”
(1,020 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-5XV
Kitamura
Table Size: 27.6” x 55.9” (700 x 1,420mm)
Travel (X, Y, Z): 50.0” x 28.0” x 25.0”
(1,270 x 710 x 635mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 40KVA
X-Series
Mycenter-7X#40
Kitamura Mycenter-7X#40 - Vertical Machining Centers
Table Size: 25.6” x 66.9” (650 x 1,700mm)
Travel (X, Y, Z): 60.2” x 25.6” x 27.0”
(1,530 x 650 x 686mm)
Spindle Taper: NST No. 40, NST No. 50
Spindle Speed: 20~10,000rpm (40~15,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 30 Pcs. (40, 60 Opt.)
Tool Change Time (T-T/C-C): 2.0 Sec. /6.5 Sec.
Rapid Feed (X, Y x Z): 945ipm (24m/min) x 787.4ipm (20m/min) 
Power Requirement: 40KVA
Mycenter-7X#50
Kitamura Mycenter-7X#50 - Vertical Machining Centers
Table Size: 25,6” x 66,9” (650 x 1,700mm)
Travel (X,Y,Z): 60,2” x 25,6” x 27,0”
(1,530 x 650 x 686mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~5,000rpm (20-10,000rpm als Option), 4-Step Gear Driven
Tool Storage Capacity: 30 Stk. (40, 60 als Option)
Tool Change Time (T-T/C-C): 2.5 Sec./8.5 Sec.
Rapid Feed (X, Y x  Z): 945ipm (24m/min)  x 787ipm (20m/min)
Power Requirement: 40KVA
REVERSE PRINT
Reverse Print Machining Center
XrossCut
Kitamura
Table Size: 20” x 24” (510 x 610mm)
Travel (X, Y, Z): 12” x 22” x 14”
(310 x 560 x 350mm)
Spindle Taper: HSK-E25
Spindle Speed: 70,000rpm
Tool Storage Capacity: 5Pcs. 
Rapid Feed (X, Y, Z): 4,724 Zoll/min (120m/min) X x 2,362 Zoll/min (60m/min) Y x 1,417 Zoll/min (36m/min) Z
Power Requirement: 20KVA
HORIZONTAL
HXiG-Series
Mycenter-HX250iG
Kitamura Mycenter-HX250iG
Table Size: 10” x 10” (254 x 254mm)
Travel (X, Y, Z): 12” x 12” x 13”
(305 x 305 x 330mm)
Spindle Taper: NST No. 30
Spindle Speed: 150~15,000rpm **30,000 Option 
Tool Storage Capacity: 40 Pcs.- Expandable in the Field to 102 Tools!
Tool Change Time
(T-T/C-C):
1.2 Sec. /2.8 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
108,000deg./min. (300rpm)
Power Requirement: 30KVA
Mycenter-HX300iG/400
Kitamura Mycenter-HX300iG - HORIZONTAL Machining Centers
Table Size: 12” x 12” (305 x 305mm)
Travel (X, Y, Z): 18.1” x 20.1” x 22.0”
(460 x 510 x 560mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm **20,000, 30,000 Option 
Tool Storage Capacity: 50 Pcs.- Field Expandable Option to 100/150/200 Tools
Tool Change Time
(T-T/C-C):
1.3 Sec. /2.5 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
54,000deg./min. (150rpm)
Power Requirement: 45KVA
Mycenter-HX400iG/500
Kitamura Mycenter-HX400iG - HORIZONTAL Machining Centers
Table Size: 15.75” x 15.75” (400 x 400mm)
Travel (X, Y, Z): 24” x 24” x 24”
(610 x 610 x 610mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm (20,000rpm Opt.)
Tool Storage Capacity: 50 Pcs. (100,150,200,300 Opt.)
Tool Change Time
(T-T/C-C):
1.3 sec. /2.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
45,000deg./min. (125rpm)
Power Requirement: 50KVA
Mycenter-HX500iG/630 #40
Kitamura Mycenter-HX500iG/630
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 31.5” x 36.6”
(870 x 800 x 930mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
1.3 sec. /3.8 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
43,200deg./min. (120rpm)
Power Requirement: 55KVA
Mycenter-HX500iG/630 #50
Kitamura Mycenter-HX500iG/630
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 31.5” x 36.6”
(870 x 800 x 930mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122,162,212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /4.8 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
43,200deg./min. (120rpm)
Power Requirement: 75KVA
Mycenter-HX630G/800
Kitamura Mycenter-HX630G - HORIZONTAL Machining Centers
Table Size: 24.8” x 24.8” (630 x 630mm)
Travel (X, Y, Z): 43.3” x 36.2” x 41.3”
(1,100 x 920 x 1,050mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122, 162, 212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.2 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
12,000deg./min. (33.3rpm)
Power Requirement: 65KVA
Mycenter-HX800G/1000
Kitamura Mycenter-HX800G - HORIZONTAL Machining Centers
Table Size: 31.5” x 31.5” (800 x 800mm)
Travel (X, Y, Z): 61.0” x 51.2” x 55.1”
(1,550 x 1,300 x 1,400mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 62 Pcs. (122, 162,212 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.9 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
2,362ipm (60m/min)
9,000deg./min. (25rpm)
Power Requirement: 70KVA
Mycenter-HX1000G/HX1250G
Kitamura
Table Size: 39.37” x 39.37” (1,000 x 1,000mm)
49.2" x 49.2" (1,250 x 1,250mm) *HX1250G
Travel (X, Y, Z): 80.31” x 51.97” x 53.94”
(2,040 x 1,320 x 1,370mm)
Spindle Taper: NST No. 50
Spindle Speed: 20~8,000rpm (35~12,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 150 Pcs. (200 Opt.)
Tool Change Time
(T-T/C-C):
3.0 sec. /7.0 sec.
Rapid Feed (X,Y,Z) 1417ipm (36m/min)
Power Requirement: 85KVA
HX-Series
Mycenter-HX400iFTGA
Kitamura Mycenter-HX400iFTGA - HORIZONTAL Machining Centers
Table Size: 15.7” x 15.7” (400 x 400mm)
Travel (X, Y, Z): 28.9” x 24” x 24”
(735 x 610 x 610mm)
Spindle Taper: NST No. 40
Spindle Speed: 35~13,000rpm (20,000rm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
1.0 Sec. /3.2 Sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1,969ipm (50m/min)
15,000deg./min.
Power Requirement: 50KVA
Mycenter-HX500iTGA
Kitamura Mycenter-HX500iTGA - HORIZONTAL Machining Centers
Table Size: 19.7” x 19.7” (500 x 500mm)
Travel (X, Y, Z): 34.3” x 28” x 26”
(870 x 710 x 660mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.)  – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
2.5 sec. /5.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1,969ipm (50m/min)
12,000deg./min.
Power Requirement: 55KVA
Mycenter-HX630iTGA
Kitamura Mycenter-HX630iTGA - HORIZONTAL Machining Centers
Table Size: 24.8” x 24.8” (630 x 630mm)
Travel (X, Y, Z): 41.34” x 33.46” x 35.43”
(1,000 x 800 x 820mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (20~8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
2.5 sec. /5.5 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B)
1969ipm (50m/min)
12,000deg/min
Power Requirement: 55KVA
Mycenter-HX800iLTGA
Kitamura Mycenter-HX800iLTGA - HORIZONTAL Machining Centers
Table Size: 31.5” x 31.5” (800 x 800mm)
Travel (X, Y, Z): 55.11” x 49.21” x 52.16”
(1,400 x 1,250 x 1,325mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (20~8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 50 Pcs. (100,150,200 Opt.)
Tool Change Time
(T-T/C-C):
3.0 sec. /7.0 sec.
Rapid Feed (X,Y,Z)
Rapid Feed (B):
1969ipm (50m/min)
8,000deg/min
Power Requirement: 55KVA
5-AXIS
MedCenter5AX
MedCenter5AX
Kitamura
Table Size: 6.7” (170mm) round dia.
Travel (X, Y, Z): 10” x 13” x 13”
(254 x 330 x 330mm)
Travel (A, C): -120~+120 Degrees/0 ~ 360 Degrees
Spindle Taper: HSK- E40
Spindle Speed: 300~30,000rpm
Tool Storage Capacity: 40 Pcs.(120 Optional)
Tool Change Time (T-T): 1.5 Sec.
Rapid Feed (X, Y, Z): 2362ipm (60m/min) X & Y, 1969ipm (50m/min) Z
Rapid Feed (A, C): 36,000 deg. /min (100rpm), 72,000 deg./min (200rpm)
Power Requirement: 35KVA
Mytrunnion-Series
Mytrunnion-1
Kitamura Mytrunnion-1 - 5-Axis Machining Centers
Table Size: 4.72” round (120mm dia.)
Travel (X, Y, Z): 12.8” x 20.1” x 18.1”
(325 x 510 x 460mm)
Travel (A, C): -110~+30 deg. /0~360 deg.
Spindle Taper: NST No. 30
Spindle Speed: 50~15,000rpm (300~30,000rpm Opt.)
Tool Storage Capacity: 60 Pcs.
Tool Change Time
(T-T/C-C):
1.1 Sec. /2.8 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 1,417ipm (36m/min) Z
Rapid Feed (A, C): 7,992 deg. /min, 360,000 deg. /min
Power Requirement: 35KVA
Mytrunnion-4G
Kitamura Mytrunnion-4g - 5-Axis Machining Centers
Table Size: 15.7” (400mm) round dia.
Travel (X, Y, Z): 24” x 24” x 19.7”
(610 x 610 x 500mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 60 Pcs. (Opt. 100T)
Tool Change Time (T-T/C-C): 2.2 Sec. /5.8 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 985ipm (25m/min) Z
Rapid Feed (A, C): 18,000 deg. /min (50rpm)
Power Requirement: 45KVA
Mytrunnion-5G
5-Axis Vertical Machining Center
Table Size: 24.8” round (630mm dia.)
Travel (X, Y, Z): 32” x 29.3” x 19.7”
(815 x 745 x 500mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm
Tool Storage Capacity: 50 Pcs. (100 Opt.)
Tool Change Time (T-T/C-C): 2.5 Sec. /5.0 Sec.
Rapid Feed (X, Y, Z): 1969ipm (50m/min) X & Y, 984ipm (25m/min) Z
Rapid Feed (A, C): 2,000 deg. /min, 6,000 deg. /min
Power Requirement: 50KVA
Mytrunnion-7G
Kitamura Mytrunnion-7G
Table Size: 39.7” (1,000mm) round dia.
Travel (X, Y, Z): 46.9” x 54.3” x 30.1” (1,190 x 1,380 x 765mm)
Travel (A, C): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm (8,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 100 Pcs.
Tool Change Time (T-T/C-C): 3.3 Sec. /9.7 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,181ipm (30m/min) Z
Power Requirement: 65KVA
Supercell-Series
Supercell-300G
Kitamura Supercell-300G - 5-Axis Machining Centers
Table Size: 7.9” (200mm) Round
Travel (X, Y, Z): 18.1” x 20.1” x 18.1”
(460 x 510 x 460mm)
Travel (A, B): -120 to +30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 200~20,000rpm
Tool Storage Capacity: 174 Pcs. (230,258,314 Opt.) Matrix Style
Tool Change Time
(T-T/C-C):
1.3 sec. /2.5 sec.
Rapid Feed
 (X, Y, and Z):
2,362ipm (60m/min)
Rapid Feed (A, B): 18,000 deg./min (50rpm)
Power Requirement: 55KVA
Supercell-400G
Kitamura Supercell-400 - 5-Axis Machining Centers
Table Size: 13.8” (350mm) Round
Travel (X, Y, Z): 20.1” x 20.1” x 20.1”
(510 x 510 x 510mm)
Travel (A, B): -120~+30 deg. /0~360 deg.
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm
Tool Storage Capacity: 140 Pcs. (190, 290 Opt.)
Tool Change Time
(T-T/C-C):
2.1 sec. /5.0 sec.
Rapid Feed
 (X, Y, and Z):
1969ipm (50m/min)
Rapid Feed (A, B): 2,400deg./min (6.7rpm)/12,000deg./min (33.3rpm)
Power Requirement: 45KVA
XVT-Series
Mycenter-3XVT
Kitamura
Rotary Table Size: 8.7" Diameter (220mm)
w/Full Table Length: 11.8" x 19.7" (300 x 500mm)
Travel (X, Y, Z): 30.7” x 20.1” x 17.3”
(780 x 510 x 439mm)
Spindle Taper: NST No. 40
Spindle Speed: 15,000rpm, Built-In, Dual Contact
Tool Storage Capacity: 40 Pcs.
Tool Change Time
(T-T/C-C):
2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y, Z): 1,890ipm (48m/min)
Power Requirement: 30KVA
Mycenter-4XT
Kitamura Mycenter-4XT - 5-Axis Machining Centers
Rotary Table Size: 15.75" Diameter (400mm)
w/Full Table Length: 14.37" x 23.62" (365 x 600mm)
Travel (X, Y, Z): 31.50” x 24.02” x 20.08”
(800 x 610 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 15,000rpm
Tool Storage Capacity: 30 Pcs.
Tool Change Time
(T-T/C-C):
2.5 Sec. /7.0 Sec.
Rapid Feed (X, Y, Z): 1,417ipm (36m/min) X/Y/Z
Power Requirement: 35KVA
DOUBLE COLUMN
G-series
Bridgecenter-6G#40
Kitamura Bridgecenter-6G#40 - Double Column Machining Centers
Table Size: 35.4” x 70.9” (900 x 1,800mm)
Travel (X, Y, Z): 60.2” x 43.1” x 28.0”
(1,530 x 1,095 x 710mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 35KVA
Bridgecenter-6G#50
Kitamura Bridgecenter-6G
Table Size: 35.4” x 70.9” (900 x 1,800mm)
Travel (X, Y, Z): 60.2” x 43.1” x 28.0”
(1,530 x 1,095 x 710mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 45KVA
Bridgecenter-8G#50
Kitamura Bridgecenter-8G#50 - Double Column Machining Centers
Table Size: 35.4” x 98.4” (900 x 2,500mm)
Travel (X, Y, Z): 80.0” x 43.1” x 28.0”
(2,032 x 1,095 x 710mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /12 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 45KVA
Bridgecenter-10G
Kitamura
Table Size: 53.9” x 118.1” (1,370 x 3,000mm)
Travel (X, Y, Z): 100.0” x 63.6” x 31.5”
(2,540 x 1,615 x 800mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /14 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 50KVA
Bridgecenter-12G
Kitamura Bridgecenter-12G - Double Column Machining Centers
Table Size: 53.9” x 137.8” (1,370 x 3,500mm)
Travel (X, Y, Z): 120.0” x 63.6” x 31.5”
(3,050 x 1,615 x 800mm)
Spindle Taper: NST No. 50
Spindle Speed: 35~12,000rpm Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60, 80 Opt.)
Tool Change Time (T-T/C-C): 6.6 Sec. /15 Sec.
Rapid Feed (X, Y, Z): 945ipm (24m/min)
Power Requirement: 50KVA
J-Series
Jigcenter-5G Vertical Jig Boring Machine
Kitamura Jigcenter-5
Table Size: 30.7” x 47.2” (780 x 1,200mm)
Travel (X, Y, Z): 32” x 29.3” x 19.7”
(815 x 745 x 500mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm – Geared Spindle
Tool Storage Capacity: 50 Pcs. (100 Opt.)
Tool Change Time
(T-T/C-C):
2.5 Sec. /5.0 Sec.
Rapid Feed (X, Y, Z): 984pm (25m/min)
Power Requirement: 35KVA
VERTICAL
Mycenter-Super Micron
Mycenter-Super Micron
Kitamura
Table Size: 15.7” x 19.7” (400 x 500mm)
Travel (X, Y, Z): 17.7” x 13.8” x 11.8”
(450 x 350 x 300mm)
Spindle Taper: HSK-E32
Spindle Speed: 400~40,000rpm
Tool Storage Capacity: 18Pcs. (40 Optional) 
Rapid Feed (X, Y, Z): 591ipm (15m/min) X, Y, Z
Power Requirement: 30KVA
G-Series
Mycenter-3020G, 15k "Sparkchanger"
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 15k
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 40~15,000rpm
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 20k “Sparkchanger”
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1” (762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm 4-Step, Gear Driven
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-3020G, 20k
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 30” x 20.1” x 20.1”
(762 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm, 4-Step, Gear Driven
Tool Storage Capacity: 30Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.4 Sec.
Rapid Feed (X, Y, Z): 1,969ipm (50m/min) X/Y x 1,417ipm (36m/min) Z
Power Requirement: 30KVA
Mycenter-4XG#40
Kitamura
Table Size: 20.6” x 43.3” (522 x 1,100mm)
Travel (X, Y, Z): 41.0” x 20.1” x 20.1”
(1,042 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 20~20,000rpm 4-Step, Gear Driven
Tool Storage Capacity: 40 Pcs. (60 Opt.)
Tool Change Time (T-T/C-C): 1.2 Sec. /4.7 Sec.
Rapid Feed (X, Y x  Z): 1,969ipm (50m/min)  x 1,417ipm (36m/min)
Power Requirement: 35KVA
Mycenter-4XG#50
Kitamura
Table Size: 20.6” x 43.3” (522 x 1,100mm)
Travel (X, Y, Z): 41.0” x 20” x 20”
(1,042 x 510 x 510mm)
Spindle Taper: NST No. 50
Spindle Speed: 20~10,000rpm – Gear Drive, 4-Step
Tool Storage Capacity: 40 Pcs. (60 Opt.)
Tool Change Time (T-T/C-C): 2.5 Sec. /8.0 Sec.
Rapid Feed (X, Y x  Z): 1,969ipm (50m/min)  x 1,417ipm (36m/min)
Power Requirement: 35KVA
XV-Series
Mycenter-2XV "Sparkchanger"
Kitamura
Table Size: 15.7” x 22.0” (400 x 560mm)
Travel (X, Y, Z): 23.6” x 20.1” x 20.1”
(600 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-3XV
Kitamura
Table Size: 19.7” x 33.9” (500 x 860mm)
Travel (X, Y, Z): 29.9” x 20.1” x 20.1”
(760 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 30 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-4XV
Kitamura
Table Size: 19.7” x 44.1” (500 x 1,120mm)
Travel (X, Y, Z): 40.2” x 20.1” x 20.1”
(1,020 x 510 x 510mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 30KVA
Mycenter-5XV
Kitamura
Table Size: 27.6” x 55.9” (700 x 1,420mm)
Travel (X, Y, Z): 50.0” x 28.0” x 25.0”
(1,270 x 710 x 635mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~15,000rpm, Built-in  
Tool Storage Capacity: 40 Pcs. 
Tool Change Time (T-T/C-C): 2.2 Sec. /4.2 Sec.
Rapid Feed (X, Y x Z): 2,047ipm (52m/min) X/Y x 1,890ipm (48m/min) Z
Power Requirement: 40KVA
X-Series
Mycenter-7X#40
Kitamura Mycenter-7X#40 - Vertical Machining Centers
Table Size: 25.6” x 66.9” (650 x 1,700mm)
Travel (X, Y, Z): 60.2” x 25.6” x 27.0”
(1,530 x 650 x 686mm)
Spindle Taper: NST No. 40, NST No. 50
Spindle Speed: 20~10,000rpm (40~15,000rpm Opt.) – Gear Drive, 4-Step
Tool Storage Capacity: 30 Pcs. (40, 60 Opt.)
Tool Change Time (T-T/C-C): 2.0 Sec. /6.5 Sec.
Rapid Feed (X, Y x Z): 945ipm (24m/min) x 787.4ipm (20m/min) 
Power Requirement: 40KVA
Mycenter-7X#50
Kitamura Mycenter-7X#50 - Vertical Machining Centers
Table Size: 25,6” x 66,9” (650 x 1,700mm)
Travel (X,Y,Z): 60,2” x 25,6” x 27,0”
(1,530 x 650 x 686mm)
Spindle Taper: NST No. 40
Spindle Speed: 50~5,000rpm (20-10,000rpm als Option), 4-Step Gear Driven
Tool Storage Capacity: 30 Stk. (40, 60 als Option)
Tool Change Time (T-T/C-C): 2.5 Sec./8.5 Sec.
Rapid Feed (X, Y x  Z): 945ipm (24m/min)  x 787ipm (20m/min)
Power Requirement: 40KVA
REVERSE PRINT
Reverse Print Machining Center
XrossCut
Kitamura
Table Size: 20” x 24” (510 x 610mm)
Travel (X, Y, Z): 12” x 22” x 14”
(310 x 560 x 350mm)
Spindle Taper: HSK-E25
Spindle Speed: 70,000rpm
Tool Storage Capacity: 5Pcs. 
Rapid Feed (X, Y, Z): 4,724 Zoll/min (120m/min) X x 2,362 Zoll/min (60m/min) Y x 1,417 Zoll/min (36m/min) Z
Power Requirement: 20KVA